Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 260)

8-3
IM 04L31A01-01E
Operations for Changing the Displayed Contents
8
8.3 Measurement Function > Measurement Group
Setup Operation
This section explains how to rename the groups of trend, digital, and bar graph displays
of the measurement function and how to register channels to those groups. For the
operating procedures of the control groups of the control function, see section 4.10,
“Control group setting.”
Procedure
Setup Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) > #4
soft key (select [Display]) > #1 soft key (select [Group set,Trip line])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
The selections are displayed at the bottom section of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
Note
The [CH set] is set using the pop-up window that appears by pressing the [Input] soft key.
4. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Setup Items
Renaming Groups of Trend, Digital, Bar Graph Displays of the Measurement
Function and Registering Channels to Groups
• Group number
Select the group you wish to set from [1] to [10].
• Group name
Enter the group name using up to 16 alphanumeric characters.
Group name display example