Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 308)

10-9
IM 04L31A01-01E
Computation and Report Function Related Operations (Only on Models with the Computation Function Option)
10
Operations on the Display
• Setting the timer
1. Use the arrow keys to move the cursor (blue) to the entry boxes under
[Timer(TLOG)].
2. Press the soft key to set the values.
3. Press the DISP/ENTER key .
• Selecting the Timer and Sum Scale
1. Use the arrow keys to move the cursor (blue) to the [First-CH] and [Last-CH]
boxes.
2. Press the soft key corresponding to the start and end channel numbers for
setting the TLOG computation.
3. Use the arrow keys to move the cursor to the [Timer No.] or [Sum scale] box
under [TLOG].
4. Select the value using the soft key .
5. Press the DISP/ENTER key .
Saving the Settings in Basic Setting Mode
1. Press the ESC key .
The display returns to basic setting menu.
2. Press the [End] soft key .
A confirmation dialog box appears
3. Select [Yes] and press the DISP/ENTER key .
The operation screen is displayed.
Setup Items
Setting Timer for TLOG Computation
• Mode
Select either [Relative] or [Absolute].
When Relative Is Selected
• Interval
Set the time until the end of the interval in “hour:minute” (00:01 to 24:00).
• Reset
Set whether to reset the TLOG computation value at every interval [On] or [Off].
• Action
If set to [DataSave], the instantaneous values of all measurement/computation
channels are written to the internal memory at every interval. Select [Off] to disable
this function.
When Absolute Is Selected
• Interval
Set the time until the end of the interval from the following 19 types.
1min, 2min, 3min, 4min, 5min, 6min, 10min, 12min, 15min, 20min, 30min, 1h, 2h,
3h, 4h, 6h, 8h, 12h, and 24h
• Ref. time
Set the time to be used as the reference. The reference time is set in the range of
0:00 to 23:00 at 1 hour steps.
• Reset
Set whether to reset the TLOG computation value at every interval [On] or [Off].
• Action
If set to [DataSave], the instantaneous values of all measurement/computation
channels are written to the internal memory at every interval. Select [Off] to disable
this function.
10.4 Setting TLOG Computations