Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 257)

7-11
IM 04L31A01-01E
Measurement Function Related Setup Operations
7
7.3 Setting the Temperature Unit
This section explains how to set the unit of temperature.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to the Setting mode (Control)) > Hold down the FUNC key for 3
seconds (switch to basic setting mode) > #1 soft key (select [Alarm,A/
D,Temperature])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the [Unit] box under
[Temperature].
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Press the DISP/ENTER key to confirm the changes.
The box for the item you changed turns from yellow to white, and the cursor returns
to the first item box.
Setup Items
Setting the Temperature Unit
• Unit
Set the unit of temperature to [C] (Celsius) or [F] (Fahrenheit).