Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 71)

1-59
IM 04L31A01-01E
Explanation of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
Alarm Summary Display Example(For details, see page 1-82)
Number of the alarm information displayed on the bottom line
Number of the alarm information in the internal memory
Alarm occurrence channel (channel No. or tag)
Alarm No. (1, 2, 3, 4)/type (H, L, h, l, R, r, T, t)
Date and time when the alarm occurred
Date and time when the
alarm was released
Mark
Cursor
Saving Data
The measured data can also be saved to external storage media such as floppy disks
(2HD), Zip disks (100 MB or 250 MB), and ATA flash memory cards (4 to 440 MB).
CX2000
1
2 3
4
DISP/ ENTER
External storage medium
Floppy disk
Zip disk
ATA flash
memory card
The data that has been saved to an external storage medium can be displayed on a PC
using the DAQSTANDARD software that comes with the package. The data can also be
loaded into the CX2000 to be displayed.
Communication Function
By using the Ethernet interface that comes standard with the CX2000, the data can be
transferred to a server on a network (client function). The data stored on the CX2000’s
external storage medium can also be read from a PC on the network (server function).
CX CX
Measured data
Server
Primary Secondary
Data on the external
storage medium
PC
CX CX
The communication functions using the Ethernet or serial interface are not covered in this
manual. See the DAQSTATION CX1000/CX2000 Communication Interface User’s
Manual (IM 04L31A01-17E)
.
1.13 Measurement Function Overview