Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 153)

3-12
IM 04L31A01-01E
Setup Procedure
• Setting the Date and Time
1. Press the [Input] soft key .
The cursor (blue) moves to the [YY] section.
2. Enter the time using the character/number input key .
When you operate the keys, the word [Input] disappears from the soft key.
3. Press the DISP/ENTER key .
The word [Input] appears on the soft key.
4. Press the DISP/ENTER key again.
To cancel the settings and close the time setting dialog box, press the ESC key.
• Setting Daylight Savings Time
1. Use the arrow keys to move the cursor (blue) to the item box you wish to
change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the
DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Setup Items
Daylight Savings Time
• Summer/Winter
• Off/On
When set to [On], the daylight savings time is enabled.
• YY/MM/DD HH
Enter the date and hour when the time is to be changed. The time is set ahead one
hour at the date and hour specified for [Summer] and set back one hour at the date
and hour specified for [Winter].
3.3 Setting the Date and Time