Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 80)

1-68
IM 04L31A01-01E
1.16 Display Function
Display Types and Switching Operation
As indicated in the following figure, key operation is used to switch the displays.
Power ON
Operation mode
Common and measurement setting mode
[Set mode]
Basic setting
mode
MENU key
Menu
Operation display
Setup display
(#1 to #8) Setup display
(#1 to #10
** )
Menu
MENU key or ESC key
Soft keys
MENU key or
ESC key
Soft keys ESC key
[End] soft key -> DISP/ENTER key
(This operation saves the settings made in the basic setting mode.)
Control setting mode
[Setting mode (Control)]
Setup display
(#1 to #8)
Press the FUNC
key for 3 s
Soft keys
MENU key or
ESC key
ESC key
MENU key
* #1 to #9 when program
control is ON.
** #1 to #9: Basic common and
measurement
settings
#10: Basic control settings
Press the FUNC
key for 3 s
Menu
Menu
This display is used to select the necessary setup items.
• Selection Display for Control Related Setup Items
Setting Display
This display is used to set various parameters for the selected item.
• Control Input Range Setting Display