Yokogawa Data Acquisition with PID Control CX2000 User Manual

Page 286

9-2

IM 04L31A01-01E

Setup Procedure

1. Use the

arrow keys

to move the cursor (blue) to the item box you wish to change.

A soft key menu is displayed at the bottom of the display.

2. Press the

soft key

corresponding to the value you wish to select.

The box for the item you changed turns yellow, and the cursor moves to the next
item.

3. Repeat steps 1 and 2 to change the value of all the items you wish to change.

Note

[Header] and [Directory name] are set using the pop-up window that appears by pressing the

[Input] soft key.

4. Press the

DISP/ENTER key

to confirm the changes.

The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.

Saving the Settings in Basic Setting Mode

1. Press the

ESC key

The display returns to basic setting menu.

2. Press the

[End] soft key

A confirmation dialog box appears

3. Select [Yes] and press the

DISP/ENTER key

The operation screen is displayed.

Starting the Acquisition to the Internal Memory

Press the

START key

When data acquisition to the internal memory starts, the memory operation indicator
icon changes from stop indication to run indication as shown below.

Stopping the Acquisition to the Internal Memory

1. Press the

STOP key

2. Use the

left and right arrow keys

to select [Memory] or [Mem+Math] in the

confirmation window that appears.

Select [Mem+Math] if you wish to not only stop the acquisition to the internal
memory, but also the computation assigned to computation channels.
If the model does not have the optional computation function (/M1), a confirmation
message “Do you want to stop storage?” appears. Select [Yes].
If the batch header option is active, the batch information is also displayed.

3. Press the

DISP/ENTER key

When data acquisition to the internal memory stops, the memory operation
indicator icon changes from run indication to stop indication.

9.1 Acquiring Measurement Data to the Internal Memory and Saving Data to the External Storage Medium