Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 304)

10-5
IM 04L31A01-01E
Computation and Report Function Related Operations (Only on Models with the Computation Function Option)
10
10.3 Setting Computation Channel Alarms
Like measurement channels, alarms can be output based on the values of the
computation channels. This section explains how to set the alarms.
Procedure
Opening the Setting Display
• Setting the alarm
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#7 soft key (select [Math set1(Expression,Alarm,Constant)])
The following display appears.
• Setting the alarm delay
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#8 soft key (select [Math set2(Tag,TLOG,Rolling average,Alarm delay)])
The following display appears.