Quantum Data 881 User Manual

Page 593

881/882 Video Test Generator User Guide

(Rev A.22)

575

5. Enable lipsync testing in generator as follows:

a. Press the

Content key. The following information appears on the generator’s

display.

b. Choose either the

LipSyncB or LipSync image.

c. Press the

Settings key. The following information appears on the generator’s

display.

d. Set the

LSGM setting to 1 by pressing the soft keys adjacent to the bottom row until

the cursor appears on the digit. Press the + or - keys to adjust the setting up or
down.

e. Press the

Enter (Options) key to save the new setting.

Alternatively, to enable the generator to measure lipsync correction through the
command line interface, enter the following command:

LSGX:LSGM 1

// Enables lipsync testing

LSGX:LSGU

// Activates lipsync testing

6. Press the

Content key. The following information appears on the generator’s display.

7. Choose the image to use for lipsync testing.

Acer1

Acer2

Acer3

Acer4

Acer5

Acer6

Acer7

Acer8

Image ->
LipSync ->
LSGM TLAT PLAT
1

0.0000 0