Quantum Data 881 - Manual (Page 1241)

881/882 Video Test Generator User Guide (Rev A.22) APO
9460 Bad location for format duplicate
This occurs during FMTD and FMTI commands when you try to use one or more invalid
format memory locations as the command arguments.
9467 Bad location for format erase
This occurs during FMTZ command when you try to make one or more invalid format
memory locations as the command arguments.
9470 Can not change EPROM contents
An attempt was made to insert a format using the FMTI command into an EPROM format
memory location.
9471 Bad location for format yank
This occurs when you try to remove (yank) one or more formats from invalid format
memory locations using the FMTY command.
9472 Can not change EPROM contents
This occurs when you try to remove (yank) one or more formats from EPROM format
memory locations using the FMTY command.
9475 Can not change EPROM contents
One or more EPROM format locations was given as the destination location for the FMTD
command.
9477 Error duplicating formats
The memory location parameter used with the FMTD command is greater than the
memory location parameter.
9480 Format not found / Format data missing
The FMTR command tried to read a format from an empty format storage location.
9490 DDC mod not present
The generator hardware configuration does not support DDC communications.
9491 DDC not available
The generator hardware configuration does not support DDC communications.
9492 DDC2B no ACK from receiver
Low level DDC communications failed with Unit Under Test (UUT). No DDC
acknowledgment bit was received from the UUT.