Quantum Data 881 - Manual (Page 149)

881/882 Video Test Generator User Guide (Rev A.22) 131
the generator ” on page 31 or “ Establishing a Telnet session with the generator ” on page
34.
4. Enter the following command to view the generator firmware version (runtime and boot
code versions):
VERF?
20.0882002,01.04.11
5. Enter the following command to view the generator gateware information for each
programmable device:
VERG?
253C,36,1272005:253F,73,8292005:253A,5,4252005
The information provided for each gateware is the Product Code, Revision Code and
Date Code. There are three sets of gatewares listed. The first listing is for an CPLD
which does not have an associated file in the System directory. The second listing is for
the transmitter and the third listing is for the receiver if the analyzer option is present.
To get a report of the genstats image (or any active image):
1. Press the Tools key. The Tools menu appears on the generator’s display as shown
below.
2. Choose the Reports item by pressing the adjacent soft key. The Report menu appears
on the generator’s display.
3. Choose the Misc item by pressing the adjacent soft key. The following menu appears
on the generator’s display.
4. Choose the !GenStats item by pressing the adjacent soft key. The generator display
will briefly indicate that the report is being generated.
System
Sequence
Probe
AFC
Analyzer
Reports
ImgShift
CEC
EDID Packets
Misc
!Formats
!Genstats