Setting up cec compliance testing, Installing the tme software, Making physical connections – Quantum Data 881 User Manual
Page 425
881/882 Video Test Generator User Guide (Rev A.22)
407
Setting up CEC compliance testing
To prepare for a compliance test involves the following:
•
Downloading and Installing the Test Management Environment software on your PC
•
Making physical connections
•
Establishing and verifying IP connectivity with the generator
•
Physically connecting the 882C(A) generator to the device under test
•
Configuring the generator for HDMI
•
Verifying continuity over the CEC bus
•
Additional equipment required
Installing the TME software
This subsection provides procedures on downloading and installing the TME software on
your PC.
To install the TME software on your PC:
1. Download the TME software from the Quantum Data website at:
http://www.quantumdata.com/downloads/index.asp.
2. Unzip the TME software and store the directory on your PC.
Note: You must also have the Java Runtime Environment (JRE) 1.5 or later installed on
your PC. You can download the JRE from
http://www.java.com/en/download/windows_ie.jsp.
Making physical connections
This subsection describes how to connect your PC to the generator and also how to
connect the generator to the device under test.