Quantum Data 881 - Manual (Page 1230)

APD Appendix C Error Messages
2396 Invalid analog composite sync type
The current firmware does not support the format’s analog composite sync type parameter
value (ASCT setting) or the generator hardware configuration does not support a video
format’s analog composite sync type for non-interlaced operation.
2397 Invalid digital composite sync type
The current firmware does not support the format’s digital composite sync type parameter
value (DSCT setting) or the generator hardware configuration does not support a video
format’s digital composite sync type for non-interlaced operation.
2398 Invalid digital separate sync type
The current firmware or generator hardware configuration does not support the format’s
digital separate sync type parameter value (DSST setting)
2399 Invalid sync type selection
The current firmware does not support the format’s active sync type selection (SSST
setting).
2400 Analog composite sync type and digital separate sync type incompatible
The generator hardware configuration does not support analog composite sync and digital
separate sync being active at he same time for the given analog composite sync type
parameter value (ASCT setting) and digital separate sync type parameter value (DSST
setting).
2401 Invalid horizontal sync pulse delay
The generator hardware configuration does not support the format’s current horizontal
sync pulse delay setting
2405 Frame sync pulse delay negative
The video format’s frame sync pulse delay setting must be zero or a positive number.
2406 Frame sync pulse delay too large
The video format’s frame sync pulse delay setting exceeds the maximum limit supported
by the generator hardware configuration.
2407 Negative probe sync pulse vertical delay
The video format’s probe pulse vertical delay setting must be zero or a positive number.
2408 Probe sync pulse vertical delay too large
The video format’s probe pulse vertical delay setting exceeds the maximum limit
supported by the generator hardware configuration.