Quantum Data 881 User Manual
Page 165
881/882 Video Test Generator User Guide (Rev A.22)
147
5. Change the host address as follows:
a. Position the blinking cursor on the address digit you want to change. To do this,
press the soft key adjacent to the arrow by the address to move the cursor left or
right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
address digit you want to change.
6. (Optional) Change the host name as follows:
a. If the Host Name configuration option is not visible, press the soft key adjacent to
the arrow symbol by Host Address until Host Name appears.
b. Position the blinking cursor on the character you want to change. To do this, press
the soft key adjacent to the arrow by the name to move the cursor left or right until
it appears on the character you want to change.
c. Select the desired character by pressing the + or - keys to scroll through uppercase
letters, lowercase letters, and numbers. Repeat for each character you want to
change.
7. To save the changes, press the
Enter (Options) key. The following choices appear on
the generator’s display:
To save the changes, choose the
Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the
No item.
To return to the Network Host screen without saving the changes, choose the
Back
item.
8. Power cycle the generator to set the server IP address.
Network Host
Set Boot Host
Host Name
Host001
Apply Settings?
Back
Yes No