Quantum Data 881 - Manual (Page 274)

256 Chapter 9 Analyzing Digital Sources and Cables
10. Refer to the table below to locate the setting you want to change, for more information
about a setting.
To change a setting value:
a. Position the blinking cursor on the value you want to change. To do this, press the
soft key adjacent to the arrow by the setting value to move the cursor left or right
until it appears on the digit you want to change.
b. Adjust the value of the setting up or down by pressing the + or - keys.
11. To save the changes, press the Enter (Options) key. The following choices appear on
the generator’s display:
To save the changes, choose the Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the No item.
To return to the parameters screen without saving the changes, choose the Back item.
Setting Description
Analysis Duration
Sequences Sets the number of sequences to analyze(1-999999999).
Report Recorded
Errors
Max Sets the maximum number of errors to record (1-9999)
Apply Settings?
Back
Yes No