Quantum Data 881 - Manual (Page 54)

36 Chapter 1 Getting Started
Sending command files (serial interface only)
When developing more complex, custom test sequences or formats, it is easiest to enter
commands in a text file, and then send the file to the generator. This approach allows you
to modify the file without entering the entire command script.
Note: Sending command text files can be performed via the serial interface only.
To send a text file to the generator:
1. Using a text editor, enter commands into a text file, and save the text file using a *.txt
extension.
2. Establish a session with the generator using a terminal emulator, such as
HyperTerminal over a serial connection.
3. At the C:> prompt, transfer the text file to the generator. For example, to transfer a file
using HyperTerminal, do the following:
a. On the Transfer menu, click Send Text File. The Send Text File dialog box
appears.
b. Select the text file you want to send, and then click Open. HyperTerminal displays
the commands as they are sent.
c. Press Enter once to ensure that the last command is sent.