Freescale Semiconductor StarCore SC140 - Manual (Page 123)

Main Capabilities of the EOnCE Module
SC140 DSP Core Reference Manual 4-13
Figure 4-7. Software Downloading
Execute CHOOSE_EOnCE and DEBUG_REQUEST instructions using the JTAG port.
EOnCE is in debug state and ready to receive a command in the ECR register.
Write a command into the ECR register with the address of the ERCV register.
The ERCV register is selected.
Write the program data to be transferred into the
memory of the ERCV register.
The ERCV register is written with the program data.
Write a command into the ECR register with the address
of the CORE_CMD register.
The CORE_CMD register is selected.
Write into the CORE_CMD register with a MOVE instruction from the ERCV
register to a core register.
The core register is written with the program data.
Write into the CORE_CMD register with a MOVE instruction from the core
register to a memory location.
The memory location is written with the program data.
Write a command into the ECR register with the address
of the CORE_CMD register.
The CORE_CMD register is selected.