Router list, Edit selected routers’ button, Router list ‘edit selected routers’ button – Grass Valley NV9000-SE v.5.0 User Manual
Page 57: Routers’ page
39
NV9000-SE Utilities
User’s Guide
‘Routers’ Page
Click ‘Routers’ in the ‘Configuration’ pane to show the ‘Routers’ configuration page:
This page provides a simple list of the routers defined in the configuration.
At the bottom of the page are 3 buttons that let you add, delete, or change router definitions:
•
‘Edit Selected Routers’ Button
•
•
Router List
The router list, initially empty for new configurations, becomes populated when you define
routers using the ‘Add Router’ configuration page. See
Each entry in the router list has 3 fields:
•
ID. The first is the data base ID for the router. These numbers are generated automatically
and you cannot change them, but they might help you distinguish identically named rout-
ers.
•
Router. The second field is the router name.
•
Host. The third field is the host name — the name of the primary system controller. Usually
the host name is “NVCONFIG” unless you change the name in the system controller.
All routers should reference the same primary system controller.
You can use standard click, shift-click, and control-click techniques to select one or more routers
in the list.
‘Edit Selected Routers’ Button
This button opens a router details page for each of the routers you have selected in the list. It is
in the router details page that you specify (1) a router’s physical levels and (2) a router’s func-
tional details.
See
Router
List
Buttons