Alphanumeric display, Tally interface – Grass Valley NV9000-SE v.5.0 User Manual
Page 277
259
NV9000-SE Utilities
User’s Guide
The function buttons each have clear plastic keycaps under which you may place plastic inserts
for button legends. Buttons of the NV9609V (virtual panel), however, have automatically gener-
ated button legends.
Scrolling is necessary in level mode and salvo mode. It is optional when the panel operator is
choosing a device in a category. The NV9609 scrolls using ‘Page Up’ and ‘Page Down’ buttons.
Alphanumeric Display
The display has 4 separate display fields.
•
Status.
The ‘Status’ field shows the source that was routed to the currently selected destination,
which is identified in the ‘Destination’ field.
If the operator is scrolling through destinations during category selection, the ‘Status’ field
changes with each destination.
If the operator is scrolling through levels in level mode, the ‘Status’ field changes to indicate
the source for each level of the current destination.
•
Preset.
The ‘Preset’ field shows the source that will be routed to the currently selected destination
when the operator presses the ‘Take’ button.
•
Destination.
The ‘Destination’ field shows the current destination.
•
‘Info’.
Under normal operating conditions, the ‘Info’ field displays the level that will be changed in
the next take. The field displays either “All Level” or the mnemonic for a selected level.
The ‘Status’, ‘Preset’, and ‘Destination’ fields can show either the names of a name set or the
system mnemonics.
Tally Interface
At the rear of the panel is a DB25 connector that provides 8 tally inputs and 4 tally outputs. (The
outputs are solid state relay outputs.) Both inputs and outputs are optically isolated.
See