Grass Valley NV9000-SE v.5.0 - Manual (Page 387)

369
NV9000-SE Utilities
User’s Guide
To add devices, select one or more devices in the list of available devices and click ‘Add
Device(s)’. To remove devices, select one or more devices in the ‘Selected Devices’ list and
click ‘Remove Device(s)’. To empty the list, click ‘Remove All Devices’.
This section is present for both multi-level and primary-level displays.
 A software bug causes the ‘Remove All Levels’ button to remain for primary level
displays. You can ignore it.
3 Level lists
This section governs the levels that are displayed when the GUI is multi-level. This section is
absent from the configuration page when you have chosen a primary level display.
When it is present, the section has two lists and 3 buttons.
The list on the left shows available levels. The list on the right (‘Selected Levels’) shows the
levels that the GUI will show when it is running. The columns of the display are ordered
according to the ordering of the list you create.
Initially, the ‘Selected Levels’ list is empty. You can add levels to this list and remove levels
from this list with the buttons of the section.
To add levels, select one or more levels in the list of available levels and click ‘Add Level(s)’. To
remove levels, select one or more levels in the ‘Selected Levels’ list and click ‘Remove
Level(s)’. To empty the list, click ‘Remove All Levels’.