Grass Valley NV9000-SE v.5.0 - Manual (Page 262)

244
Control Panels
NV9606
NV9606 Configuration Page
This is the default NV9606 panel configuration page:
After you have configure the panel’s buttons, and the panel options, the page will have
changed, showing, in particular, the text of the buttons you have defined.
At the bottom of the page are 3 important buttons: ‘Revert to Saved’, ‘Save’, and “Save & Close’.
The ‘Save’ button commits modifications you have just made. The ‘Revert to Saved’ button
restores the last saved version of the panel configuration, canceling any changes you just made.
‘Save & Close’ saves the panel configuration and dismisses the page.
Regions of the Configuration Page
Above the ‘Revert to Saved’ and ‘Save’ buttons (always present) there are 4 main regions:
• A graphic representation of the NV9606 panel.
Configurers must click a button “proxy” to select the button for configuration.
• Button definitions.
In this section, configurers make button assignments, using its pull-down menus and text
fields. See
Button Definition Section , following.
• GPIO definitions.
In this section, configurers may define GPIO logic. The control panel has a rear connector
that provides 4 relay outputs and 8 optically isolated inputs. See
GPIO on page 197. (Note
that the graphical buttons represent connector terminals and not actual buttons.)
• Panel options.
In this section, configurers may specify the behavioral characteristics of the panel. See the
NV9606 User’s Guide for detailed information.
Button
Definition
Section
Panel Image
GPIO
Section
Panel Options