Tally interface – Grass Valley NV9000-SE v.5.0 User Manual
Page 338
320
Control Panels
NV9649
Display Fields
The display area has four separate 8-character display fields:
•
Status.
The ‘Status’ field shows the source that is routed to the currently selected destination, which
is identified in the ‘Destination’ field.
If the operator is scrolling through levels in level mode, the ‘Status’ field changes to indicate
the source for each level of the current destination. Level mode is available only when the
panel is operating under the NV9609 model.
•
Preset.
The ‘Preset’ field has two different functions:
(1) It shows the source that will be routed to the currently selected destination when the
operator presses the ‘Take’ button or will be assigned to a client.
(1) It shows the source that will be assigned to a source button of a client NV9648 when the
panel is operating under the ‘Panel Server’ model.
The ‘Preset’ field also shows source or destination categories and source or destination
devices during category selection.
•
Destination.
The ‘Destination’ field shows the currently selected destination.
•
‘Info’.
Under normal operating conditions, the ‘Info’ field displays the level (or levels) that will be
changed in the next take. The field displays either “All Level” or the name of a selected level.
When the panel is operating under the NV9609 or LCD XY/MD model, the ‘Status’, ‘Preset’, and
‘Destination’ fields can show either names from a name set or the system mnemonics.
Tally Interface
At the rear of the panel is a DB25 connector that provides 8 tally inputs and 4 tally outputs. (The
outputs are solid state relay outputs.) Both inputs and outputs are optically isolated.
See