Function buttons, Alphanumeric display, Modes of operation – Grass Valley NV9000-SE v.5.0 User Manual
Page 243
225
NV9000-SE Utilities
User’s Guide
At the rear are power, serial, and network connectors:
Function Buttons
The NV9602 has an array of 32 function buttons on the left and 6 function buttons on the right.
The 10 buttons at the top left are labeled with numerals (0–9). These are for menu operations
such as entering the panel ID.
Physical source buttons represent one of two “pages” of sources. Physical destination buttons (if
present) represent one of two pages of destinations. The panel can be configured with a ‘Source
Shift’ button that toggles between the two source pages and a ‘Destination Shift’ button that
toggles between the two Destination pages.
Each button has three operational levels: high and low tally (green or amber), and off. (The
button material is actually white or light gray.)
The function buttons each have clear plastic keycaps under which you may place plastic inserts
for button legends. Buttons of the NV9602V (virtual panel) have automatically generated button
legends.
Alphanumeric Display
The display has 2 fields of 8 characters:
•
Status, labeled “S” on the panel.
The ‘Status’ field always shows the source that was routed to the currently selected destina-
tion, which is identified in the ‘Destination’ field.
•
Destination, labeled “D” on the panel.
The ‘Destination’ field shows the current destination.
The two fields can show either names from a name set or the system mnemonics.
Modes of Operation
The NV9602 operates in one of 4 modes:
•
•
Single-Destination Mode with Breakaway
•
•
Ethernet
Serial port (RS-232)
Power (AC)