Grass Valley NV9000-SE v.5.0 - Manual (Page 106)

88
System Management
Navigation Pane
Navigation Pane
If you right-click any system controller in the system management pane, a context menu
appears allowing you to configure additional aspects of the system controller:
The context menu has 12 commands:
Add Control System Edit This Control System Ignore This Control System
Remove This Control System Edit/View DHCP Edit/View SNMP
Set/Change Virtual IP Load Snapshot from . . . Save Snapshot to . . .
Edit Name Sets Convert to Tieline Status GUI Generate Difference Report
Add Control System
 This command performs the same function as the ‘Add Control System’ command of the
‘System’ menu.
When you click ‘Add Control System’, NV9000-SE Utilities presents a dialog in which to identify
the control system:
The command adds a control system entry to the ‘System Management’ pane.
Place a check in the ‘Redundant’ check box if your control system is a pair of system controllers.
Enter the name of the control system in the ‘Control System name’ field.
Enter the IP address of the first system controller in the first IP address field. If the control system
is redundant, also enter the IP address of the second system controller in the second field.
Click ‘Save and Dismiss’ to create an entry in the ‘System Management’ page and close the
dialog.