Grass Valley NV9000-SE v.5.0 - Manual (Page 258)

240
Control Panels
NV9605
Regions of the Configuration Page
There are 4 main regions:
• A graphic representation of the NV9605 panel.
Configurers must click a button “proxy” to select the button for configuration.
• Button definitions.
In this section, configurers make button assignments, using its pull-down menus and text
fields. See
Button Definition Section , following.
• Panel options.
In this section, configurers may specify the behavioral characteristics of the panel. See the
NV9605 User’s Guide for detailed information.
• GPIO definitions.
In this section, configurers may define GPIO logic. The control panel has a rear connector
that provides 4 relay outputs and 8 optically isolated inputs. See
GPIO on page 197.
(Note that the graphical buttons represent connectors and not actual buttons.)
Button Definition Section
The button definition section configures the button you have selected in the image of the
NV9605:
When you choose a button type, additional drop-down menus can appear, depending on the
button type, allowing you to further specify the button’s behavior. Available options and selec-
tions vary from button type to button type.
These are the button types available for NV9605 configurations:
Broadcast Chop Default state Destination
Destination Lock Destination Protect Free Source Hold
Level Menu Name Set Toggle None/All
Panel Lock Previous Source Salvo Source
Source Master Source Shift
Not all button types are available in all modes. Only a few button types are available for the 32
buttons to the left of the display.
 Note that other panels might have button types with the same names but that perform
different functions.