Metrohm viva 1.0 (process analysis) - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 81
Selection blue | green | ochre | brown
Default value blue
3.2.3 Displaying the workplace
3.2.3.1 Selecting a workplace
Program part: Workplace
The number of currently opened workplaces is displayed in the upper left-
hand corner of the workplace symbol. If two or more workplaces are
opened, then these workplaces, which can be displayed either next to one
another or one above the other in the main window, can be selected with
the aid of the workplace symbol.
One workplace is opened and is displayed in the main
window.
Two workplaces are opened. Normally only one work-
place is displayed in the main window, but the option
exists of displaying two workplaces at once, either next
to one another or one above the other.
A menu with the names of the currently opened
workplaces is displayed by clicking with either
the left or right mouse button on the workplace
symbol. The workplaces displayed in the main
window are then marked with a checkmark.
Clicking on the desired workplace will cause it to
be displayed in the main window in place of the
previously selected one.
3.2.3.2 Displaying an individual workplace
Menu item: Workplace ▶ View ▶ Unsplit
In the default settings, the most recently opened workplace is displayed by
itself in the main window. If the display of two workplaces is activated,
then the symbol or the View
▶ Unsplit menu item can be used to
switch back to the display of just one single workplace.
3.2.3.3 Displaying workplaces next to one another
Menu item: Workplace ▶ View ▶ Split vertically
Two workplaces are displayed next to one another in the main window
with the symbol or the View
▶ Split vertically menu item.