Metrohm viva 1.0 (process analysis) - Manual (Page 649)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 637
5.6.7.7.14 Relative standard deviation of the calibration factor DT
Variable name RS.’Command name’.’Substance name’.CALFACT.RSD
Description Relative standard deviation of the calibration factor DT.
Decimal places 0…1…6
Unit %
Remark Only for Calibration method = DT and Sample type = Standard.
5.6.7.7.15 Concentration of the substance in the measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM
Description Substance concentration in the measuring vessel.
Decimal places 0 ... 2 ... 6
Unit Corresponds to the unit of the standard solution
Remark Only for Calibration method = MLAT.
5.6.7.7.16 Unit of the substance concentration in the measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM.UNI
Description Unit of the substance concentration in the measuring vessel.
Decimal places −
Unit g/L, L/L or mol/L (depending upon the unit of the standard solution)
Remark Only for Calibration method = MLAT.
5.6.7.7.17 Absolute standard deviation of the substance concentration in the
measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM.ASD
Description Absolute standard deviation of the substance concentration in the mea-
suring vessel.
Decimal places 0…2…6
Unit As for concentration of the substance in the sample (see Chapter
5.6.7.6.1, page 629)
Remark Only for Calibration method = MLAT.