Metrohm viva 1.0 (process analysis) - Manual (Page 667)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 655
removed
Users with the removed status can no longer log in. If the set status
of a user is changed from enabled or disabled to removed, then the
user will automatically be moved to the Removed users group. If the
status of a removed user is changed back to enabled or disabled,
then a dialog window will appear for selecting the group to which the
user is to be assigned.
Start password
The invisible start password is displayed with six * characters which must
be entered by a new user the first time that new user logs in or after a
change in status from disabled or removed to enabled. The administra-
tor must assign a new start password when adding a new user or when
changing the status to enabled. If the user has logged in with the start
password and then entered a new password afterwards, then the start
password will be deleted again.
Entry 50 characters
[Set start password]
Opens the Start password dialog window. This button is active only for
users with enabled status. If a user has forgotten his or her password,
then the administrator can assign a new start password here.
User group
Current user group. The administrator can modify the group assignment
of the user. The user is automatically moved to the new group. A user can
also be moved to a new group with drag and drop.
Selection Selection of the defined user groups
Remarks
Possibility of entering additional user information (e.g. function, address).
Entry 1,000 characters
6.2.1.3.2 Adding a user
Dialog window: Configuration ▶ Tools ▶ User administration... ▶ [Add user] ▶ Add
user
There are two possible ways to add a new user:
￭ Select a user group and then the context-sensitive Add user menu
item.
￭ Select a user group and click on the [Add user] button.
The Add user dialog window is then opened in both cases.