Metrohm viva 1.0 (process analysis) - Manual (Page 281)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 269
Value
Value of the variable. For variables of the type Date/Time, the date has
to be entered in the (see Chapter 2.4.1, page 68) dialog window.
Input range -1.0 E+99 - 1.0 E+99 (max. 15 digits)
(for Type = Number)
Entry 100 characters
(for Type = Text)
Selection 'Date'
(for Type = Date/Time)
4.5.2.5.5 Result view
The results defined in the method and calculated in the determination as
well as the variables used for this are displayed and updated with each
recalculation in the Result view subwindow of the Reprocess dialog
window.
4.5.2.5.5.1 Result view - General
Subwindow: Database ▶ Determination overview ▶ Determinations ▶ Repro-
cess... ▶ Reprocessing ▶ Result view
Tabs
The results and curves of a determination are displayed on the following
tabs:
￭ Curves
Shows the measurement curves and calibration curves.
￭ Results overview
Overview of all automatically generated and user-defined results.
￭ Results
Details on the automatically generated results for each VA measuring
command and each defined substance.
￭ User-defined results
Details on the user-defined results.
Navigation
If several determinations are selected for reprocessing then the navigation
buttons can be used to switch between the result view of the individual
determinations:
Jump to the first determination.
Jump to the previous determination.