Metrohm viva 1.0 (process analysis) - Manual (Page 471)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 459
Input range 0 - 5
Default value 2
Comment
Comment regarding calculated measured value.
Entry 250 characters
Default value 'empty'
5.5.2.5.7.2 External measured value
Dialog window: Method ▶ MEAS ▶ Properties... ▶ Additional measured val-
ues ▶ [New]/[Properties] ▶ External measured value
With the Additional external measured values option, a maximum of
three new measured values can be adopted and saved from additional
measuring commands running simultaneously in other tracks (e.g. MEAS)
that can also be displayed as curves under the designation External 1 - 3
and be used as variables *.EX1 - 3 in formulas.
Command
Selection of the command from which the additional measured value is to
be adopted.
Selection Selection from existing measuring commands
Quantity
Selection of the measured quantity from the measuring command that is
to be adopted as additional measured value.
Selection Selection from existing measured quantities
Unit
Shows the unit of the external measured value.
Comment
Comment regarding external measured value.
Entry 250 characters
Default value 'empty'
5.5.2.6 Calibration commands
5.5.2.6.1 Calibration commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Calibration
The following calibration commands can be selected: