Metrohm viva 1.0 (process analysis) - Manual (Page 557)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 545
Analytical volume
Volume portion (aliquot) of the diluted sample's dilution volume used for
the determination (see Glossary, page 956). This volume is added to the
measuring vessel with the ADD SAMPLE command.
Input range -1E+99 - 1E+99 (max. 10 places) mL
Default value 'empty' mL
Dilution volume
Maximum filling volume used for dilution of the sample (see Glossary,
page 959).
Input range -1E+99 - 1E+99 (max. 10 places) mL
Default value 'empty' mL
NOTE
Sample data can also be loaded directly from a barcode reader. To
accomplish this, Data import must be activated in the Run window in
which the determination is started (Single determination or Deter-
mination series) and the respective instruments must be defined. The
Sample data request dialog window closes automatically after the
data is received from these instruments.
5.5.2.10.3 LOOP
5.5.2.10.3.1 LOOP - Overview
Dialog window: Method ▶ LOOP ▶ Properties... ▶ LOOP - 'Command name'
Command for the repeated execution of method parts. The loop can
be ended after the fulfillment of various stop criteria.
Appearance
The command has the following appearance:
A newly inserted loop command has an arrow on the left side that can be
dragged with the mouse to the desired command in the same track in
order to generate a loop. Two different types of loops result, depend-
ing on whether the arrow is dragged upwards or downwards:
Repeat loop While loop