Metrohm viva 1.0 (process analysis) - Manual (Page 839)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 827
7.10.6 Properties - Analog inputs
All recognized inputs are automatically listed in a table on the Analog
inputs tab. The settings can be modified for each analog input.
Port
Shows the internal designation of the port.
Port description
Shows the port designation.
Type
Shows the port type.
Low level (0 %)
Shows the lowest analog input value with unit.
High level (100 %)
Shows the highest analog input value with unit.
0% Mapping
Measured value to be used when the Low level (0 %) is applied as input
value, with unit.
100% Mapping
Measured value to be used when the High level (100 %) is applied as
input value, with unit.
[Edit]
Opens the Properties Analog input dialog in order to edit the selected
port (see Chapter 7.10.6.1, page 828).
[Port description]
Opens a menu in order to import or export port designations.
The [Port description] menu contains the following menu items:
Import Import of a text file (*.txt; *.csv) containing the port designations. Each line is
interpreted as a port designation, empty lines will be ignored.
Export Export of a text file containing the port designations of all digital inputs.