Metrohm viva 1.0 (process analysis) - Manual (Page 806)

7.6 Avantes Spectrometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
794 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Input range -270.0 - 270.0 °
Default value 60.0 °
Work position
Definition of the work position for the selected external position.
Input range 0 - 235 mm
Default value 0 mm
7.6 Avantes Spectrometer
7.6.1 Avantes Spectrometer - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the Avantes Spectrometer are set on the following
tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Settings
Information on light source and output signal.
￭ Detector
Information on the detector.
￭ Calibration
Information on wavelength calibration.
￭ Dark spectrum
Information on the dark spectrum.
￭ Reference spectrum
Information on the reference spectrum.
￭ GLP
Information on GLP tests and GLP monitoring.
7.6.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Name of the device, can be freely defined by the user.
Entry 50 characters
Default value Device type number_#
Device type
Shows the device type.