Metrohm viva 1.0 (process analysis) - Manual (Page 404)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
392 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Command name
Name of the command.
Entry 1 - 25 characters
Default value VA track #
Live display
on | off (Default value: on)
If this check box is activated, then the track will be displayed in the live
display.
Return immediately
on | off (Default value: off)
If this check box is activated, then the program does not wait for this track
to be completed, but rather this track responds immediately to the track
with the call command. From now on, both tracks will be running simulta-
neously.
Command variables
The following command variables are generated by the VA TRACK com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identifi-
cation Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started
FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command
has never ended
5.5.2.2.5 SERIES START
Dialog window: Method ▶ SERIES START ▶ Properties... ▶ SERIES START - 'Com-
mand name'
Start command for the series start track.
Appearance
The command has the following appearance: