Metrohm viva 1.0 (process analysis) - Manual (Page 686)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
674 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Backup name
Selection of a backup file.
Selection 'Backup files'
Backup date
Shows the time at which the configuration database was backed up. This
information is not available if the backup file is located on a network
drive.
Database name
Shows the name of the configuration database. This information is not
available if the backup file is located on a network drive.
Size
Shows the size of the configuration database in KB.
Save as
Shows the name under which the configuration database will be restored.
[Start]
Starts restoration of the configuration database. After the start, a progress
bar appears in the window. The dialog window closes automatically once
the backup has been completed.
6.3.3 Templates
6.3.3.1 Templates - Input lines
6.3.3.1.1 Managing templates for input lines
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Input lines... ▶ Templates
for input lines
Client-specific bit patterns for scanning remote input signals can be
defined in the Templates for input lines dialog window and selected
with the SCAN command and in manual control. The table with the
defined templates cannot be edited, but it can be sorted according to the
selected column in ascending or descending order by clicking on the col-
umn title.
The [Edit] menu below the list of templates or a right-click on the table
opens a menu with the following menu items:
New... Create a new template (see Chapter 6.3.3.1.2, page 675).
Properties... Edit the selected template (see Chapter 6.3.3.1.2, page 675).