Metrohm viva 1.0 (process analysis) - Manual (Page 597)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 585
Base point evaluation
Selection of the method for determining the base points.
Selection Automatically | Manual
Default value Automatically
Automatically
If this option is selected, then the base points are determined automat-
ically for the baseline calculation.
Manual
If this option is selected, then the base points can be specified man-
ually for the baseline calculation.
Start base point
Manually specified start base point at which the baseline is to begin.
Input range -5.000 - 5.000 V
Default value 'empty' V
End base point
Manually specified end base point at which the baseline is to end.
Input range -5.000 - 5.000 V
Default value 'empty' V
Navigation bar
Navigation bar for changing the displayed substances with the following
functions:
Jump to the first substance. Altered data is adopted.
Jump to the previous substance. Altered data is adopted.
Jump to the next substance. Altered data is adopted.
Jump to the last substance. Altered data is adopted.
Option of entering the desired line number to which the program jumps
when [Enter] is pressed.