Metrohm viva 1.0 (process analysis) - Manual (Page 414)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
402 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Designation 'RS.'Command name'.VAR{x}.Variable identification'
Identification Description
VTOT Total volume in the measuring vessel for variation {x}
Result variables if called by CALL INTERCEPT
The following result variables are generated in the method run when a
CVS command is called by CALL INTERCEPT and can be used in formu-
las:
Result variables per substance, INTERCEPT and replication:
Designation 'RS.'Command name'.'Substance name'.INTER-
CEPT.REP{y}.Variable identification'
Identification Description
SUBST Substance name
POT Peak potential
AREA Peak area
HGT Peak height
START Start base point, where the peak evaluation baseline
begins
END End base point, where the peak evaluation baseline
ends
AREANORM Standardized peak area (AREA/INTER-
CEPT.AREA.MNV)
HGTNORM Standardized peak height (HGT/INTER-
CEPT.HGT.MNV)
Result variables per substance and INTERCEPT
Designation 'RS.'Command name'.'Substance name'.INTER-
CEPT.Variable identification'
Identification Description
AREA.MNV Mean value of the peak areas of all replications
AREA.ASD Absolute standard deviation of the peak areas of all
replications
AREA.RSD Relative standard deviation of the peak areas of all
replications
HGT.MNV Mean value of the peak heights of all replications