Metrohm viva 1.0 (process analysis) - Manual (Page 580)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
568 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
5.5.2.11.6 CONTROL
5.5.2.11.6.1 CONTROL- Overview
Dialog window: Method ▶ CONTROL ▶ Properties... ▶ CONTROL - 'Command
name'
Command for controlling Beckhoff instruments.
Instruments
This command can be executed with the following instruments:
IO Controller
Dosing Interface: 846
Appearance
The command has the following appearance:
Parameters
The parameters for the CONTROL command are configured in the fol-
lowing dialog window:
￭ CONTROL - Properties
Command variables
The following command variables are generated by the CONTROL com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
IVS Value of the input at the start of the command.
IVE Value of the input at the end of the command.