Metrohm viva 1.0 (process analysis) - Manual (Page 306)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
294 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Selection 13 colors | light green
Default value light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection 13 colors | blue
Default value blue
Curve properties MEAS - Measuring point list
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ Measuring point
list
Parameters for the display of the measuring point list.
Available columns
Shows all fields that can be displayed as columns in the measuring point
list. The display depends on the command type.
Displayed columns
Shows all fields that will be displayed as columns in the measuring point
list.
Adds the selected column to the measuring point list.
Removes the selected column from the measuring point list.
Changes the sequence of displayed columns by moving the selected col-
umn up and down.
4.5.2.5.5.3 Result view - Results overview
Tab: Database ▶ Determination overview ▶ Determinations ▶ Repro-
cess... ▶ Reprocess ▶ Result view ▶ Results overview
All automatically generated results for each VA measuring command and
each defined substance as well as all user-defined results are listed on the
Results overview tab. Details on the automatically generated results are
displayed on the Results tab (see Chapter 4.8.3, page 340) and details
on the user-defined results on the User-defined results (see Chapter
4.8.4, page 341) tab.