Metrohm viva 1.0 (process analysis) - Manual (Page 887)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 875
Devices
The stirrer functions can be carried out with stirrers that are connected to
the following instruments:
Voltammetry instrument: 894
Dosing Interface: 846
Sample changer: 814, 815, 858, 919
8.4.3.2 Stirring - Switching on/off
Program part: Manual control
Here you can switch stirrers on and off. This tab appears both when a sin-
gle stirrer or all stirrers are selected.
Stirring rate
Selection of stirring rate. This parameter can also be modified live.
all instruments except for Photometer
Input range
–15 - 15
Default value 8
Photometer only
Input range
1 - 15
Default value 3
[Start]
Starts stirring for the selected stirrer.
[Stop]
Stops stirring for the selected stirrer.
8.4.3.3 Stirring - Operating time
Program part: Manual control
You can switch on stirrers for a defined time. This tab only appears if a
single stirrer is selected.
Stirring rate
Selection of the stirring rate. This parameter can also be modified live.
all instruments except for Photometer
Input range
–15 - 15
Default value 8
Photometer only
Input range
1 - 15
Default value 3