Metrohm viva 1.0 (process analysis) - Manual (Page 553)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 541
5.5.2.10.2 REQUEST
5.5.2.10.2.1 REQUEST - Overview
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - 'Command
name'
Command for the request for sample data in the method run. The data
can either be entered manually or adopted from an input instrument (bar-
code reader).
Appearance
The command has the following appearance:
Parameters
The parameters for the REQUEST command are configured in the follow-
ing dialog window:
￭ REQUEST
Command variables
The following command variables are generated by the REQUEST com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
5.5.2.10.2.2 REQUEST - Properties
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - Data input #
Command name
Name of the command.
Entry 25 characters
Sample data request
The sample data that is to be entered not earlier than during the determi-
nation can be selected in the REQUEST - data entry # dialog window.