Metrohm viva 1.0 (process analysis) - Manual (Page 593)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 581
Edit menu
New... Selects the empty line marked with the asterisk and opens the Substance -
Recognition dialog window (see Chapter 5.6.3.3, page 581).
Properties... Edit the selected line (see Chapter 5.6.3.3, page 581).
Copy Copies the selected lines to the clipboard.
Paste Inserts all lines from the clipboard above the line marked with the asterisk.
Cut Copies the selected lines to the clipboard and deletes them.
Delete Deletes the selected lines.
5.6.3.3 Editing recognition
Subwindow section: Method ▶ Evaluation ▶ Substances ▶ Recogni-
tion ▶ [Edit] ▶ New... / Properties... ▶ Substance - Recognition
Measuring command
Shows the measuring command for which the substances can be defined.
Substance
Name of the substance that must be unambiguous within the same table
for each measuring command. The same substance name can however
also be used for a different measuring command.
Entry 1 - 50 characters
Default value New substance
Active
on | off (Default value: on)
If this check box is activated, then this substance will be evaluated; if it is
deactivated, then no evaluation will take place. Parameter data from inac-
tive substances will also continue to be listed in other tables, but have no
effect on the determination.
Characteristic potential
Verification potential for the assignment of a peak to a substance.
Input range -5.000 - 5.000 V
Default value 'empty' V
The peak potential determined must be within the
range Characteristic potential ± Tolerance so
that the substance is recognized.