Metrohm viva 1.0 (process analysis) - Manual (Page 276)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
264 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
NOTE
The reprocessing window cannot be closed while the recalculation
process is still running.
4.5.2.5.2 Reprocessing - Window
Dialog window: Reprocess
Subwindows
The Reprocess dialog window contains the following two subwindows,
which can be enlarged and reduced by dragging the separating bar
between them:
￭ Modifications
Changing methods and variables.
￭ Result view
Displaying the current results.
Functions
If determinations have been modified in the Modifications subwindow,
then the following functions can be triggered:
[Recalculate]
Recalculates the selected determination(s) with the modifications made to
the method or variables in the Modifications subwindow.
A progress bar is shown during recalculation. Recalculation can be can-
celed with next to the bar. The results of this recalculation are auto-
matically entered in the Result view subwindow.
This button is disabled as long as no modifications have been made. After
recalculation, further data can be modified and recalculation triggered
again.
[Reset]
Resets all modifications that were made but not yet saved during reproc-
essing to the original data and results.
This button is inactive for as long as no modifications have been made or
recalculation has not been triggered.
[OK]
Closes the Reprocess dialog window. Each determination that has been
modified by reprocessing will be saved as a new version with a version
number increased by +1.