Metrohm viva 1.0 (process analysis) User Manual
Page 303
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭
291
For MEAS Spec
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value
off
For MEAS Opt
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Temper-
ature [°C] | d
ε/dt [mAU/min] | Calculated 1 - 3 |
External 1 - 3 | off
Default value
off
For CAL Spec
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels | off
Default value
off
For MEAS TMF
Selection
Time [s] | Measured value [mAU] | Transmis-
sion [%] | Temperature [°C] | d
ε/dt [mAU/min] |
off
Default value
off
Label
Freely definable axis label for the y2 axis. If auto is selected, then the des-
ignation from the Quantity field will be used.
Selection
50 characters | auto
Default value
auto
Curve
Curve color
Selection of the color for the line of the curve.
Selection
13 colors | light green
Default value
light green
Symbol
Selection of the symbol for the display of the individual measuring points.
Selection
● | ╳ | ✸ | ￭ | ▲ | no symbol
Default value
no symbol
no symbol
Measuring points are not shown.