Metrohm viva 1.0 (process analysis) - Manual (Page 533)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 521
5.5.2.8.9 RLS DEV
5.5.2.8.9.1 RLS DEV - Overview
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Command name'
Command to release an instrument for using it in other parallel running
methods. It removes the reservation made by the current method.
Instruments
This command can be executed with the following instruments:
Sample changer: 814, 815, 858, 919
Appearance
The command has the following appearance:
Parameters
The parameters for the RLS DEV command are configured in the follow-
ing dialog window:
￭ RLS DEV - Properties
Command variables
The following command variables are generated by the RLS DEV com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
5.5.2.8.9.2 RLS DEV - Properties
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Command name'
Command name
Name of the command.
Entry 25 characters