Metrohm viva 1.0 (process analysis) - Manual (Page 515)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 503
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Instrument type field can no longer be
edited and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 858.0020 Professional Sample Processor
Target
Tower
Selection of the tower on the sample changer for moving to the required
position.
Selection 1 | 2
Default value 1
Move
Selecting the target position on the rack:
Selection Sample position | Rack position | Special
beaker | Relative angle
Default value Sample position
Sample position
Position that is defined for the current determination in the Run sub-
window of the Workplace program part as Sample position para-
meter.
Rack position
Absolute position on the rack.
Special beaker
Special position on the rack that is defined in the rack properties in the
Configuration program part.
Relative angle
The sample rack can be rotated by a certain angle independent of the
rack positions. This function can be used, for example, to remove vial
caps automatically.