Metrohm viva 1.0 (process analysis) - Manual (Page 830)

7.10 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
818 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
￭ (see Chapter 7.10.5, page 824)
Digital outputs of the IO controller.
￭ (see Chapter 7.10.6, page 827)
Analog inputs of the IO controller.
￭ (see Chapter 7.10.7, page 829)
Analog outputs of the IO controller.
￭ Controller
Controller of the IO Controller.
￭ (see Chapter 6.5.3.3, page 693)
Information on GLP tests and GLP monitoring.
7.10.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
Device name
Designation of the device, can be freely defined by the user.
Entry 50 characters
Default value Device type number_#
Device type
Shows the device type.
Wrapper version
Shows the version of the AdsWrapper.dll.
Firmware version
Shows the PLC firmware version on the bus controller. Consists of the bus
controller firmware and the version of the bus controller program.
AdsDll version
Shows the version of the AdsDll.dll.
Device serial number
Shows the serial number of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Remarks
Remarks about the device.
Entry 1,000 characters
Default value empty