Metrohm viva 1.0 (process analysis) - Manual (Page 840)

7.10 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
828 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
7.10.6.1 Properties Analog input
Dialog window Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Analog inputs ▶ [Edit] ▶ Properties Analog input
The properties of the individual analog inputs are set in the Properties
Analog input dialog window.
Port
Shows the internal designation for an analog input port of the type
AnIn_x_y_z, where x stands for the controller, y for the analog input ter-
minal and z for the input on this terminal.
Port description
Freely selectable designation for an analog input port. This designation is
used in the program to actuate the port.
Entry 50 characters
Default value AnIn_x_y_z
The following characters must not be part of the
port designation: \, ', ., {, }, [, ].
Port specification
Shows the port specification.
Type
Shows the port type.
Low level (0 %)
Shows the lowest analog input value.
This value is read out automatically and depends on the Type.
High level (100 %)
Shows the highest analog input value.
This value is read out automatically and depends on the Type.
Unit
Shows the unit of the analog input value.
This value is read out automatically and depends on the Type.