Metrohm viva 1.0 (process analysis) - Manual (Page 571)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 559
￭ >0: With a stirring performance of 100% (Parameter 1 = 100), pulse
duration 10 ms
Example:
Parameter 1 = 100, Parameter 2 = 30: pulse duration switched on
300 ms, switched off 0 ms
Parameter 1 = 75, Parameter 2 = 30: pulse duration switched on
225 ms, switched off 75 ms
Input range -214,783,647 - 214,783,647
Default value 0
5.5.2.11.3 DIGITAL IN
5.5.2.11.3.1 DIGITAL IN - Overview
Dialog window: Method ▶ DIGITAL IN ▶ Properties... ▶ DIGITAL IN - 'Command
name'
Instruments
This command can be executed with the IO controller and the Stepping
Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
At the time of the command, the statuses of all of the digital inputs are
entered and saved in command variables (syntax 'Command name.Vari-
able identification')
Parameters
The parameters for the DIGITAL IN command are set on the following
tabs:
￭ General
Parameters for instrument.
￭ Stop criteria
Parameters for the definition of the stop criteria.
Command variables
The following command variables are generated by the DIGITAL IN com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Port name.Variable identification':