Metrohm viva 1.0 (process analysis) - Manual (Page 524)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
512 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Instrument type field can no longer be
edited and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 858.0020 Professional Sample Processor
Pumps
Tower
Selection of the tower at which the pumps are to be actuated. The
choices are always Tower 1 and Tower 2, even if the sample changer only
has one tower.
Selection 1 | 2
Default value 1
Pump(s)
Selection of the pumps that are to be actuated. These can be installed or
connected externally. The two pumps of the selected tower are actuated
simultaneously with 1+2.
Selection 1 | 2 | 1+2 | Peristaltic
Default value 1
1
Pump 1 is actuated.